Ferodo Ds2500 Rear Brake Kit

Part Number: FCP4663H-EFA165-BPF0055

Производитель: Ferodo

The rear brake kit is a great value offer. The kit offers Ferodo ds2500 rear pads which offer enhanced stopping performance, a wear sensor that should be changed when new pads are installed and new pins, which is a must-change item when installing new brake pads.

KIT SPECIFICATION
Ferodo DS2500 x1: FCP4663H
EBC Rear wear sensor x1: EFA165
Rear pin set x1: BPF0055

Цена: 370.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/ferodo-ds2500-rear-brake-kit-5237-fcp4663h-efa165-bpf0055.html

Ferodo Ds2500 Front Brake Pads

Part Number: FCP4611H

Производитель: Ferodo

Ferodo DS2500 Front Brake Pads are high-performance road pads and track-day pads, which are made to give your car enhanced braking performance!

PRODUCT SPECIFICATION
Great for track days
Can handle high temperatures without brake fade
The friction coefficient of 0.42
Optimal working temperature between 20 - 500 Degrees
DISCLAIMER
These pads are for TRACK USE only! R44 Performance can take no responsibility if you decide to use these pads on the road.

Цена: 365.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/ferodo-ds2500-front-brake-pads-5238-fcp4611h.html

Hawk Performance DTC 60 Brake Pads

Part Number: HB518G.642

Производитель: Hawk

Hawk Performances DTC 60 brake pads feature high torque with less initial bite than their DTC 70 pads. Featuring superior release and torque control characteristics, the pad compound is designed for cars with high deceleration rates with or without downforce. This model is recommended for use with DTC 70 when split friction between front and rear axle is desired. Order the universal or application-specific replacement pad set designed for your caliper type.

Цена: 310.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/hawk-performance-dtc-60-brake-pads-5253-hb518g642.html

Hawk Performance DTC 60 Brake Pads

Part Number: HB464G.764

Производитель: Hawk

Hawk Performances DTC 60 brake pads feature high torque with less initial bite than their DTC 70 pads. Featuring superior release and torque control characteristics, the pad compound is designed for cars with high deceleration rates with or without downforce. This model is recommended for use with DTC 70 when split friction between front and rear axle is desired. Order the universal or application-specific replacement pad set designed for your caliper type.

Цена: 415.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/hawk-performance-dtc-60-brake-pads-5255-hb464g764.html

Goodridge Brake Hoses Sets

Part Number: 31066

Производитель: Goodridge

Goodridge Brake Hoses Sets

Цена: 200.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/goodridge-brake-hoses-sets-5259-31066.html

GiroDisc Front Rotors 380mm

Part Number: A1-186

Производитель: GiroDisc

If you have an M2 Competition, please see our front rotors for that application.

If your car is equipped with carbon ceramic brakes, please see our direct replacement iron rotors.

The Girodisc system is a direct replacement for the OE disc. No modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.

The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Цена: 1690.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/girodisc-front-rotors-380mm-5282-a1-186.html

GiroDisc Rear Rotors 368mm

Part Number: A2-186

Производитель: GiroDisc

The Girodisc system is a direct replacement for the OE disc, no modifications are necessary. The disc will bolt directly to the car and work with OE calipers perfectly. By upgrading your brakes with lightweight high performance replacements as opposed to a big brake kit, your factory bias is maintained as well as your ABS efficiency.

The central hat section of our rotor is made from strictly U.S. sourced 6061-T6 aircraft specification aluminum. The disc is made from our own proprietary cast iron, poured in the USA and machined from start to finish in house at Girodisc. The rotor utilizes a curved vane design, developed in racing to act as a centrifugal pump to force cooling air through the disc.

The rotor and hat have a floating mount system, which utilizes 10 high strength alloy steel drive pins, manufactured by Girodisc in the USA to our own specifications and cadmium plated for a long lasting corrosion resistance. These pins take the load from braking actions while maintaining the axial and radial float between the hat and disc. The pins are secured by class 12.9 cap screws with hardened washers. In order to keep the rotors from making noise when cold, the pins are mounted with anti-noise spring washers on the rotor side which allow the rotor to grow with heat expansion but eliminate the rattle and noise associated with floating rotors. This float also allows the rotor to self center between the pads.

Once the Girodisc system is in place, simply replace the cast iron rotor when needed.

Цена: 1690.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/girodisc-rear-rotors-368mm-5284-a2-186.html

Brembo X-Style Brake Calipers

Part Number: FALE32

Производитель: Brembo

Brembo X-Style brake calipers are dedicated to car owners who are passionate and care deeply about all aspects of their vehicle quality, reliability, performance, and style that is provided with color. Granting a touch of originality, customers can choose their favorite color to complement or contrast with their car. Brembo X-Style brake calipers are available in kit format with two fixed Brembo aluminum calipers and two complete sets of assembly accessories (springs and pins). Go ahead, "make them look twice"; customize your car with the color of Brembo X-Style brake calipers. Choose the calipers and color designed for your car.

Цена: 1560.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/brembo-x-style-brake-calipers-5285-fale32.html

Stoptech AeroRotor Front Slotted Black Hat

Производитель: Stoptech

StopTech AeroRotor Replacement Kits ARK are designed to replace your vehicles original factory rotors, while retaining the factory brake calipers. Although the ARK is the same diameter and thickness as the factory rotors, it offers improved cooling, braking, and handling. The directional, floating AeroRotors allow independent expansion of the rotor and hat without "coning," thanks to elongated drive pin holes. ARK components include AeroRotor friction rings with patented internal vane design, pre-assembled to billet aluminum AeroHats with directional stand-offs that optimize cooling airflow. The patented AeroRotor vane design pushes up to 80 percent more air than factory rotors for better cooling and reduced fade on the track. The aircraft-grade aluminum hats and 2-piece AeroRotors are up to 8 pounds lighter than stock rotors, allowing faster acceleration and deceleration, and improved handling. StopTech AeroRotors are available slotted or cross-drilled. These slots or holes allow better dissipation of heat, friction material and debris, assuring that fresh pad material is in contact with the rotor every time the brakes are applied. An optional anti-corrosion, zinc finish is available for customers in cold climates, where salt and chemicals are used to melt snow and ice. The zinc coating also benefits customers who prefer no visible surface rust on the vanes and outer circumference of the rotors. StopTech AeroRotors are 100 percent made in the USA.

Цена: 2650.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/stoptech-aerorotor-front-slotted-black-hat-5287.html

Stoptech Trophy Big Brake Kits

Part Number: 83.B38.6Q00.R1

Производитель: Stoptech

StopTech Trophy big brake kits are the ultimate to obtain track or street performance. Offering Trophy Race and Trophy Sport kits, StopTech uses the same lightweight, fully forged STR calipers and 2-piece AeroRotors for both, but with different components added. StopTech Race kits include braided stainless steel lines, mounting brackets, and MAX Float hardware that allows for the greatest amount of float between the hat and rotor. Their Sport kits are for street-driven vehicles and add silicone boots to extend service intervals, anti-rattle rotor mounting hardware for quieter street operation, and Sport brake pads.

Цена: 6300.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/stoptech-trophy-big-brake-kits-5289-83b386q00r1.html