Fidanza Billet Aluminum Flywheels

Part Number: 195321

Производитель: Fidanza

Fidanza billet aluminum flywheels feature excellent heat dissipation and weight reduction. The replaceable friction surface is machined from 1045 steel and attached with military-grade aerospace fasteners. These flywheels are manufactured from the highest quality 6061-T6 billet aluminum and feature a 1050 heat-treated steel ring gear thats pressed on and secured with Grade 8 button screws. They also use a stepped dowel system so that when the parts are installed theyre locked into place. No chromoly can compete with the awesome serviceability, strength, and superior design of Fidanza billet aluminum flywheelsavailable in nearly 200 models and options for applications from the 1940s and up.

Цена: 625.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/fidanza-billet-aluminum-flywheels-5251-195321.html

The Driveshaft Shop Driveshafts

Part Number: 610318

Производитель: Driveshaft Shop

Brand:
The Driveshaft Shop

Manufacturers Part Number:
610318

Part Type:
Driveshafts

Цена: 2820.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/the-driveshaft-shop-driveshafts-5288-610318.html

Clutch Masters Flywheel

Part Number: FW-140-SF

Производитель: Clutch Masters

Lightweight steel flywheel

Цена: 870.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/clutch-masters-flywheel-5300-fw-140-sf.html

ACT Xtreme Clutch

Part Number: BM9-XTG6

Производитель: ACT

ACT Xtreme clutch kits pave the road to high performance by meshing solid products, outstanding quality, and exceptional value. These Xtreme clutch kits with racing or street discs are based on solid engineering principles. They afford a clamp load increase of 50 to 100 percent with moderate-to-stiff pedal feel, and many of these new (not rebuilt) units are SFI-certified to ensure safety. Youve spent long hours building your engine; now put it in motion with the smooth, precise feel and longer life of an ACT Xtreme clutch kit.

Цена: 1200.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/act-xtreme-clutch-5301-bm9-xtg6.html

Driveshaft Shop Driveshafts

Part Number: 610055

Производитель: Driveshaft Shop

The Driveshaft Shop Driveshafts

Цена: 1430.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/driveshaft-shop-driveshafts-5306-610055.html

SPEC Stage 1 Clutch Kit

Part Number: SB661SMG

Производитель: SPEC

SPEC Stage 1 clutch kits are designed for street, drag race, drifting, road race, rally, pulling, and autocross use. They feature integrally molded carbon-Kevlar® based, high performance organic linings that offer smooth engagement and excellent life. These linings have an integrally bonded steel backing for strength under high clamp loads and temperatures. Hubs are double-sprung with spring cover reliefs for flexibility and heat-treated components for strength and durability. Nearly a thousand different kits are available for countless applications, from the 1940s and up.

Additional features of SPEC Stage 1 clutch kits:

High-clamp pressure plate
Steel-backed and multi-compound woven organic material
High-torque sprung hub and disc assembly
Best for street and many track and off-road applications

Цена: 780.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/spec-stage-1-clutch-kit-5309-sb661smg.html

OS Giken TR Plate Clutch

Part Number: BM156-BF3

Производитель: OS Giken

The TR Clutch series line-up was designed for vehicles which have substantial increases in engine power. The billet aluminum cover provides a more direct clutch pedal feel, but still maintains ease of engagement due to the unique leverage mechanism of the diaphragm spring to reduce overall pedal effort.

The TR2B was designed with common tuner engines in mind. The clutch discs are 204mm in size and are good up to about 500lbs ft for NA motors. This type of clutch will give great engine response possible while also handle a fair amount of torque output. The aluminum cover allows for higher clamping force (increased capacity) and will handle the hard abuse often found at the track.

Цена: 2720.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/os-giken-tr-plate-clutch-5317-bm156-bf3.html

OS Giken SuperLock LSD

Part Number: BM237-HA

Производитель: OS Giken

The OS Giken Super Lock LSD uses our patented pressure ring design that allows for smooth, progressive locking. This design is a spline-through-side-gear design that allows for fitment of more friction plates (up to 2x as many as competitors versions).


All components are chemically heat treated for maximum durability
All components are constructed from a high-grade steel alloy
Gears are raw-forged for maximum strength
Clutch disks are precision-machined simultaneously on both sides to extremely tight tolerances resulting in minimal warpage.
LSD case is machined from a single billet piece to ensure uniformity.
The OS LSD standard spec allows for low preload while still retaining a fully progressive 100% lock capability. Operation is quiet and the progressive locking allows for smooth predictable locking. When replacing an open diff, equipping an OS LSD will completely improve the driving experience while maintaining everyday drivability.

Цена: 2530.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/os-giken-superlock-lsd-5318-bm237-ha.html

Clutch Masters Factory Fit FX250 Series Twin Disc

Производитель: Clutch Masters

The Clutch Masters Factory Fit FX250 Series Twin Discs kit for the 2021+ BMW G80 M3 AND G82 M4 with the amazing S58 engine and a 6-Speed manual transmission was developed to bridge the gap between replacing the comfortable driving twin disc that came in these cars from the factory and one of the more race orientated 725, 850 or 1000 Series twin disc kits. As OE auto manufactures continue to push for more and more power, they are typically equipping those cars lucky enough to be outfitted with a manual transmission with a twin disc clutch. But what happens when the factory clutch starts to wear out or slip because youve modified and tuned the car? Lots of owners of these higher end powerful cars still want to maintain a car that is easy to drive on the street, yet still be able to reliably take the abuse they inevitably want to throw at it. Most arent looking to go full race car and install a twin disc designed for such use, there has to be a compromise.

The answer to these dilemmas is a Factory Fit FX Series Twin Disc Clutch Kits. Using components similar to what came in the car from the factory, the CM engineering team does everything they can to expand and improve upon the OE twin disc in many ways. Using higher end friction materials, lighter materials and expertise in developing performance clutch kits for over 45 years, CM has dialed in a twin disc kit that bridges the gap between full race car and luxury daily driver making serious horsepower. In the case of the BMW G8X twin disc, we have done away with the factory self-adjusting cover, a little over 10lbs of weight reduction in the entire assembly, and we have gone from an 8.5" clutch disc to a 9.5" disc for significantly more disc surface area.

The Clutch Masters FX Series Twin Disc kits utilize proven friction materials found in the FX Series Single Disc Clutch kits and are available in several different configurations to suit you and your cars needs.

The Factory Fit FX250 Series Twin disc will come as a complete replacement kit utilizing a lightweight aluminum Type 3 hard anodized flywheel, steel floater, factory style stamped steel cover, two DLX clutch discs utilizing a combination of Fiber Tough friction material on the side of the disc contacting the pressure plate, and steel backed organic friction material on the flywheel side of the disc, throw out bearing, and clutch fork.

This clutch is designed for the street enthusiast or weekend racer who plans to abuse their vehicle on an occasional basis and has a very spirited driving style. The FX250 clutch system has a higher holding capacity than a traditional full faced kevlar disc without compromising the street friendly characteristics

Цена: 2800.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/clutch-masters-factory-fit-fx250-series-twin-disc-5353.html

Clutch Masters 1000 Series 10 Twin Disk Clutch Kit With Flywheel

Производитель: Clutch Masters

The Clutch Masters FX1000 is a 10.00” (254mm) Twin Disc clutch unit designed for high horsepower applications that performs well on the track and can even withstand heavy street use. The strap-driven plate design allows for smooth engagement and minimal clutch chatter while still being able to withstand hard launching, clutch kicking, and high RPM shifting. Designed for the enthusiast who pushes the limits of performance on their high powered vehicle and wants to maintain excellent pedal feel.

The cover assembly is machined from billet aluminum and is then Type 3 hard anodized. Our billet covers have roughly 25% more tensile strength than the competition’s cast unit. By focusing our ability on machining the strongest cover possible while maintaining minimal weight, we are basically able to eliminate any flex in the cover. Our billet covers see only .003" of flex where as a cast or stamped unit can see as much as .030" of flex. By eliminating this flex in the cover, the driver is able to operate the clutch much more consistently and confidently. All the movement being applied to the diaphragm of the clutch from the throw-out bearing is used solely to engage and disengage the clutch and isnt wasted by the cover flexing first. The strength of our covers also results in greater clamping force over the same amount of area vs. a cast or stamped cover. This means our twin discs are easy to drive and have superior clamping force to make sure all the power your engine is making is being utilized.

Flywheels are made for each specific application in either aluminum or steel. Our aluminum flywheels are machined from billet 6061-T6 aluminum to meet SFI spec 1.2 for competition in NHRA, NDRA, IDRC, IHRA, SCCA and NASA. Aluminum flywheels are Type 3 hard coat anodized to ensure their durability and performance lasts. Each aluminum flywheel includes a replaceable insert. Steel flywheels are machined from 1045 billet cores and are then black oxide treated for rust prevention.

Цена: 3340.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/clutch-masters-1000-series-10-twin-disk-clutch-kit-with-flywheel-5354.html