K&N Air Intake

Part Number: 63-3099

Производитель: K&N

The K&N AirCharger 63-3099 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Camaro ZL1 models (see vehicle applications). K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Camaro ZL1 engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3099 air intake tube is made almost completely out of ultra-lightweight carbon fiber. Included is a K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

Цена: 790.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/kn-air-intake-4624-63-3099.html

AEM воздушный фильтр Camaro

Part Number: 21-2100DK

Производитель: AEM

Chevy Camaro SS 2017-2018, Aluminum Gunmetal Gray Cold Air Intake System by AEM. To deliver cooler air to the engine, this air intake system places the air filter outside the engine compartment. Cooler air is denser than warm air and so contains more oxygen, which results in better combustion and more power

Цена: 80.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/aem-vozdushnyj-filtr-camaro-4638-21-2100dk.html

Injen впуск Camaro

Part Number: EVO7301

Производитель: Injen

The Evolution Air Induction Systems incorporate a massive SuperNano Web Dry Air Filter with a built-in Filter Minder for quick and easy filter inspections without disassembling your intake system. Made with pride in the U.S.A. Evolution Air Induction System comes ready to install and simply bolts in place of your factory intake system. Comes complete with stainless steel hardware and automotive grade hose couplers for a hassle-free installation

Цена: 350.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/injen-vpusk-camaro-4639-evo7301.html

K&N 63 Series Aircharger Air Intakes

Part Number: 63-3079

Производитель: K&N

The K&N AirCharger 63-3079 air intake system replaces the restrictive factory air filter and air intake housing in some Chevrolet Camaro ZL1 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your Camaro ZL1 engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3079 air intake is made almost completely out of ultra-lightweight carbon fiber and comes with a K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.

Цена: 1050.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/kn-63-series-aircharger-air-intakes-4679-63-3079.html

Mishimoto Silicone Induction Hose Black

Part Number: MMHOSE-CAM4-16IHBK

Производитель: Mishimoto

High-Flow Induction Hose Upgrade
Reinforces Engine Power with a High-Powered Air Charge
Outflows Factory Hose by 22%
With a 36% Increase in Internal Volume
High-Grade, 5-Ply Silicone Construction
With Molded Steel Internal Rings for Extra Durability
Comes in Black
Connects to Stock CCV System with the Pre-Installed CNC Fitting
Directly Fits with Stock Intake Box
Bolt-On Installation
Comes with a Limited Lifetime Warranty
Fits All 2016 to 2022 2.0L Chevrolet Camaro Models

Цена: 230.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/mishimoto-silicone-induction-hose-black-4919-mmhose-cam4-16ihbk.html

K&N Drop-In Replacement Air Filter

Part Number: 33-5047

Производитель: K&N

Replacement for GM Part Number 23323508
Improves Horsepower and Acceleration
Filters Out Harmful Contaminants
Red, Oil Treated, Cotton Gauze Construction
Flat Stock Style Air Filter
Filter is Washable and Reusable
Easy Drop-In Replacement
Backed by K&Ns Million Mile Limited Warranty
Designed for use with the Stock Air Box
Fits All 2016-2022 SS, ZL1 Camaro Models

Цена: 80.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/kn-drop-in-replacement-air-filter-4922-33-5047.html

MSD Atomic Airforce LT1 Intake Manifold

Производитель: MSD

Provides Horsepower and Torque Gains
Designed Using Computational Fluid Dynamic Modeling
Sports a Direct Flow Path Runner Design
With Black Logo
Durable Polymer Plenum and Base Construction
Comes in Black
Has a 2-Piece Manifold Design
Tuning Is Not Required
Compatible with Stock and Aftermarket Fuel Rails
Accepts OEM or 103mm Throttle Body
Direct Bolt-On Installation
Supported by a Limited 1-Year Warranty
With a CARB EO Number of D-722-3
Engineered to Fit 2016-2022 LT1 and SS Chevrolet Camaro Models

Цена: 1730.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/msd-atomic-airforce-lt1-intake-manifold-4928.html

AEM Air Intake

Part Number: 21-859C

Производитель: AEM

This Performance Air Intake System allows your engine to breath more air compared to the restrictive factory air intake housing. It is designed, tuned, and dyno-tested to produce more horsepower and torque. The cone-shaped AEM Dryflow air filter is made from an oil-free, synthetic filter media that can be used for up to 100,000 miles before cleaning is needed (depending on driving conditions). A custom shaped heat shield with edge trim lining is included to keep engine bay heat from the air intake. The air intake tube is constructed from mandrel-bent aluminum featuring a durable gunmetal gray powder coated finish. This air intake system is backed by AEMs Lifetime Limited Warranty. Some AEM air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View the vehicle applications to determine the legal status for each vehicle.

Цена: 585.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/aem-air-intake-4954-21-859c.html

Mishimoto впуск

Part Number: MMAI-CAM8-16BK

Производитель: Mishimoto

Provides Max Gains of 14 WHP / 14 WTQ while Maintaining Safe A/F Ratios
Wire-Reinforced Silicone Elbow Eliminates Restrictions and Improves and Increases Airflow Capacity
Extremely Aggressive Intake Tone Under Acceleration
Heat-Resistant, Glass-Reinforced Nylon MAF Sensor Housing and Integrated Air Straightener Molded by Plastic Injection
Powder Coated Black Airbox Keeps Unwanted Hot Air from Entering the Air Filter
Mishimoto High-Flow Oiled Air Filter Receives Maximum Airflow from the Front of the Vehicle
No Tune Required
Mishimoto Lifetime Warranty

Цена: 550.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/mishimoto-vpusk-4966-mmai-cam8-16bk.html

Injen PF Series Power-Flow Intake

Part Number: PF7017P

Производитель: Injen

Injen PF Series Power-Flow intake systems are engineered to the highest standards, utilizing the latest technology available. Incorporating Injens own patent-pending MR Technology, these cold air units are the worlds first tuned intake systems on the market! They ensure the highest horsepower and torque gains within the safe factory air/fuel ratio limits. Power-Flow intakes deliver a blast of oxygen at the perfect moment for blazing combustion and gut-wrenching power output, placing your motor on a steady diet of colder, richer oxygen. The process starts with the high-flow air filters integrated air inducer, air stabilizer, and velocity stack. Fresh air is drawn in, smoothed out, and then pressurized. From there, the oxygen flows through the Mega Ram-tuned pipe, where its released to the mass airflow sensor at calculated intervals. Each kit goes through a rigorous dyno-testing process and is fine-tuned to unleash ferocious performance across the rpm spectrum. Injen Power-Flow intake systems bolt on without any drilling. Order the model designed for your vehicle application.

Цена: 600.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/injen-pf-series-power-flow-intake-4955-pf7017p.html