Оборудование MoTeC для тюнинга в Украине

MoTeC M880 ECU

Производитель: MoTeC

The M880 is MoTeC’s top of the line ECU. Developed for motorsport professionals, it takes the M800 engineering one step further with an Autosport connector, Advanced Functions‡ as standard and an optional 4 MB logging memory.

This powerful ECU suits the same broad scope of applications as the M800, including modern engines with up to 12 cylinders and twin, triple or quad rotor applications.

It offers maximum sophistication to control the latest automotive advances, such as continuously variable camshaft timing and drive by wire throttle, while maintaining the flexibility to suit a range of users.

* Advanced Functions includes: Traction Control, Launch Control, Gear Change Ignition Cut (flat shifts) and Overrun Boost Enhancement (anti-Lag).

BASIC SPECIFICATIONS
Outputs
8 x Injector outputs—high or low ohm ‡
6 x Ignition outputs ‡
8 x Auxiliary outputs—for functions such as camshaft control, drive by wire throttle, boost control, nitrous injection, idle speed stepper motor and many more
‡ Optional injector / ignition configurations:
(requires 10/12 Cylinder Sequential upgrade)
10 high ohm injector outputs and 4 ignition outputs
12 high ohm injector outputs and 2 ignition outputs
Inputs
8 x Analogue voltage inputs—fully configurable including custom calibrations
6 x Analogue temperature inputs—fully configurable including custom calibrations
2 x Wideband Lambda inputs—for Lambda measurement and control
4 x Digital/speed inputs—for wheel speeds and function activation
Communications
1 x CAN
1 x RS232
Physical
Case size 147 x 105 x 40 mm
Weight 525 gram
1 x 66 pin Autosport connector

Здесь можно посмотреть полный прайс-лист на все товары фирмы MoTeC в фунтах. Чтобы получить цену в долларах, умножьте на 1.65.

Цена: 5730.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/motec-m880-ecu-2045.html

5730.00$

0

MoTeC M800 ECU

3460.00$

0

MoTeC M84 ECU

2440.00$

0

MoTeC M600 ECU

3110.00$

0

MoTeC M400 ECU

2830.00$

0

MoTeC M48 ECU

1820.00$

0

MoTeC M4 ECU

1240.00$

0

MoTeC ADL3 Dash

6520.00$

0

MoTeC SDL3 Dash

2730.00$

0

MoTeC MDD Dash

Производитель: MoTeC

The Mini Digital Display (MDD) is a small satellite display, compact enough to mount on the steering wheel, but it can also be mounted in a more conventional position. Typical applications for the MDD are as a display for a MoTeC ECU or the ACL or EDL3 data logging systems that do not have a built in display.

MoTeC data loggers and hundred series ECUs connect to the MDD via CAN and the M4 and M48 ECUs connect via a single wire serial connection.

The MDD input kit is available, which allows for connecting of up to five push buttons or rotary analogue switches.
Compatible with
ADL3, EDL3, SDL3, ACL
M400, M600, M800, M880 (software version V2.11D and later)
If using the MDD input kit, software version V3.4 and later is required
M4, M48 (software version V6.21B and later). Not compatible with MDD input kit
MDD used with a data logger
When the MDD is connected to a data logger it is configured using the loggers manager software in the same way as a logger with a built-in display would be configured. This allows any channel to be displayed in the various screen locations and provides multiple display pages (Race, Warm-up and Practice). The MDD can also show alarm messages.

The MDD has a number of screen layouts providing a balance between text size and the amount of information displayed. Some screen layouts include a bar graph for the Lap gain/loss function or for a tachometer. A special layout is available for showing eight values such as exhaust temperatures in a bar graph format.

Page control and bottom line scrolling is provided via buttons connected to the data logger, or, if using the MDD input kit, via buttons connected to the MDD which sends the button information to the logger via CAN.

MDD used with an ECU
When the MDD is connected to an ECU the display has a number of fixed layouts with multiple pages. A push button connected to the MDD allows selection of the display page and switching between two modes of operation as follows:

Normal mode shows RPM, speed, engine temperature, and gear. The bottom line may be toggled to show a number of different values including lap time, air temperature, MAP and many more.
Tuning mode shows information that is useful for tuning such as RPM, throttle position, Lambda etc. There are a number of different display pages showing different parameters including a diagnostics page.
BASIC SPECIFICATIONS
Inputs
5 x Analogue/switch inputs when used with the input kit, trim pots or switches. More inputs are available with custom wiring.
No inputs on standard MDD
Communications
1 x CAN
1 x Serial logic level
Display
Dot matrix backlit graphics LCD
Adjustable backlight brightness (not available when used with an ECU)
Physical
Dimensions 86 x 59.5 x 22 mm excluding connector
Weight 120 gram
1 x 6 pin Deutsch DTM connector, flying lead
Здесь можно посмотреть полный прайс-лист на все товары фирмы MoTeC в фунтах. Чтобы получить цену в долларах, умножьте на 1.65.

Цена: 1410.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/motec-mdd-dash-2053.html

1410.00$

0

+ 38 095 0000100

>

+ 38 095 0000100

>

Прошу перезвонить

MoTeC M880 ECU

Производитель: MoTeC

Цена: 5730.00$

MoTeC M800 ECU

Производитель: MoTeC

Цена: 3460.00$

MoTeC M84 ECU

Производитель: MoTeC

Цена: 2440.00$

MoTeC M600 ECU

Производитель: MoTeC

Цена: 3110.00$

MoTeC M400 ECU

Производитель: MoTeC

Цена: 2830.00$

MoTeC M48 ECU

Производитель: MoTeC

Цена: 1820.00$

MoTeC M4 ECU

Производитель: MoTeC

Цена: 1240.00$

MoTeC ADL3 Dash

Производитель: MoTeC

Цена: 6520.00$

MoTeC SDL3 Dash

Производитель: MoTeC

Цена: 2730.00$

MoTeC MDD Dash

Производитель: MoTeC

Цена: 1410.00$