Выхлоп для тюнинга Porsche 997/996 в Украине

Fabspeed Supersport Выхлоп Porsche 997

Производитель: Fabspeed

-Fits all 997TT Vehicles 2005-2009
-X-Pipe Muffler Bypass ONLY $1,695; Must Have Fabspeed 70mm Sportcats and Tips.
-This setup is designed to replace the factory exhaust system from turbo outlet to tips.
-Constructed from 14-16 gauge, high quality 2.75”/70mm T304 stainless steel, C.N.C. mandrel bent tubing for maximum power and sports car sound.
-HJS 200 cell, tri-metallic sport catalytic converters for improved exhaust flow without setting the C.E.L.
-Complete bolt-on system which replaces the factory exhaust with no cutting or welding required.
-Fabspeed Motorsport was the first to design 3 different levels of sound for the Turbo vehicle, now we offer a fourth which is more aggressive than the Maxflo but not as loud as the muffler bypass pipes.

Цена: 4750.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/fabspeed-supersport-vyxlop-porsche-997-2209.html

4750.00$

0

Fabspeed 63.5mm Maxflo Выхлоп Porsche 996

3590.00$

0

Fabspeed Sport Version 3 Выхлоп Porsche 997

4520.00$

0

Fabspeed Sport Выхлоп Porsche 997 GT2

5890.00$

0

Shark Werks Выхлоп Porsche 997 GT2

1990.00$

0

Shark Werks Выхлоп Porsche 997 Turbo

1990.00$

0

AWE Tuning Выхлоп Porsche 996

Производитель: AWE Tuning

Our new Gen2 system uses a lighter single can design, without any increase in sound volume. Born from our work with the 997 GT2, this new muffler design smooths the exhaust tone by incorporating a harmonic cross over effect between the two cylinder banks inside the shared can. Power gains during R&D were very impressive, outstripping the gains we have seen from other systems on the market.

Features:
NO DRONE, period!
NO check engine lights
31 lbs weight saving over OEM
28 peak crank hp gain on K16 turbos, more with K24s
Complete kit with all gaskets and hardware
Lifetime Warranty
Our exhausts have earned praise from owners and the press alike, due to their unique "Jekyll and Hyde" personality. We spend considerable time and effort during development to achieve remarkable civility when idling and at part throttle cruising, while also producing a war-cry wail when full throttle is applied.

Our exhausts are also like bespoke suits: each is hand made utilizing only the finest casing and packing materials, and they command respect without calling unwanted attention to themselves. Sophisticated, refined, and powerful, all at once. Further, each system is personalized with the original owners name on the serial badge.

We have taken extra steps to produce a no compromise exhaust muffler. There is absolutely no drone, even at part throttle between 2000 and 2800 rpms, guaranteed. Almost none of our competitors can back up the same claim.

Also unique is that our design incorporates German HJS 200 cell per square inch metal substrate catalytic converters, to ensure long term emission compliance and no check engine lights. The use of premium 200 cell per square inch cats produced less the 1 psi of additional backpressure vs no cat at all.

For die hard track junkies, we offer an optional cat bypass set to work with this muffler, allowing complete removal of the cats within minutes. Please save the use of these pipes for the race track!

Each AWE Tuning muffler features an O2 sensor threaded bung before the driver side catalytic converter for quick and easy installation of a wide band air/fuel sensor. Each system also comes complete with new hanging straps, exhaust nuts, and all gaskets for a perfect, leak free install. This 2.5" diameter system reuses your stock tips.

Цена: 4690.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/awe-tuning-vyxlop-porsche-996-2339.html

4690.00$

0

Fabspeed Коллекторы Porsche 996

1830.00$

0

EVOMS 500-650hp Коллекторы Porsche 997/996

Производитель: Evolution MotorSports

Design Inspiration: Evolution MotorSports stainless steel headers are meticulously engineered, tested and manufactured to improve performance for a wide variety of applications. Our design approach was not limited to building a “one size fits all” header for every application. Through our extensive testing and development process, we have created a variety of different headers that are properly sized for a wide range of power levels. Producing many different size headers is not cost effective or efficient from a manufacturing perspective; however, we believe that providing the most efficient and best designed headers for various power levels is far more important.

Technical Details:
· Manufactured with a 2-piece header to head flange and internally welded like the OEM Porsche headers
· Reduces thermal stresses caused by expansion and contraction
· Minimizes risk of header cracking
· Argon purged for optimized weld quality / weld joint penetration
· Retains OEM ground clearance which minimizes the risk of damaged headers
· EVOMS headers provide an additional 1.25” of ground clearance as compared to other aftermarket headers
· CAD engineered, virtual and real world tested for optimum efficiency and performance
· Available in different primary tube sizes which have been developed specifically for a variety of power applications

Different diameter headers will change the exhaust velocity and overall flow from the heads to the turbochargers. Smaller headers can generate a quicker boost response, however, they can cause exhaust “choke” by not allowing enough exhaust volume to sustain higher power levels. Conversely, headers that are too large in diameter can reduce the amount of exhaust velocity causing slower turbocharger boost response and a loss in bottom end power. An optimized header for a specific power application will improve mid range power and torque throughout the entire rev range. Our header designs optimize the exhaust flow through the mandrel bent primary tubes and merge collectors. They have superior flow characteristics compared to the OEM header and are size specific depending on application and desired power. Our headers also maintain the stock amount of ground clearance which eliminates the risk of header damage from a low hanging primary tube which is common for most other aftermarket headers.

Benefits:
· Increases horsepower and torque
· Up to 30 HP & 30 lb/ft. TQ - depending on application
· Typical gains are ~15 HP/TQ
· Optimizes exhaust flow for increased power in the higher RPM’s
· Improves turbocharger spool characteristics for increased mid range torque
· Perfect fit - direct replacement for the OEM headers
· Meticulously hand fabricated in our AZ headquarters by EVOMS Master Fabricator: Al Berini
· Manufactured with the finest grade stainless steel
· 50 state emissions legal
· Lifetime warranty against cracking / manufacturing defects – Original purchaser.

Цена: 3600.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/evoms-500-650hp-kollektory-porsche-997996-2197.html

3600.00$

0

EVOMS 650-750hp Коллекторы Porsche 997/996

Производитель: Evolution MotorSports

Design Inspiration: Evolution MotorSports stainless steel headers are meticulously engineered, tested and manufactured to improve performance for a wide variety of applications. Our design approach was not limited to building a “one size fits all” header for every application. Through our extensive testing and development process, we have created a variety of different headers that are properly sized for a wide range of power levels. Producing many different size headers is not cost effective or efficient from a manufacturing perspective; however, we believe that providing the most efficient and best designed headers for various power levels is far more important.

Technical Details:
· Manufactured with a 2-piece header to head flange and internally welded like the OEM Porsche headers
· Reduces thermal stresses caused by expansion and contraction
· Minimizes risk of header cracking
· Argon purged for optimized weld quality / weld joint penetration
· Retains OEM ground clearance which minimizes the risk of damaged headers
· EVOMS headers provide an additional 1.25” of ground clearance as compared to other aftermarket headers
· CAD engineered, virtual and real world tested for optimum efficiency and performance
· Available in different primary tube sizes which have been developed specifically for a variety of power applications

Different diameter headers will change the exhaust velocity and overall flow from the heads to the turbochargers. Smaller headers can generate a quicker boost response, however, they can cause exhaust “choke” by not allowing enough exhaust volume to sustain higher power levels. Conversely, headers that are too large in diameter can reduce the amount of exhaust velocity causing slower turbocharger boost response and a loss in bottom end power. An optimized header for a specific power application will improve mid range power and torque throughout the entire rev range. Our header designs optimize the exhaust flow through the mandrel bent primary tubes and merge collectors. They have superior flow characteristics compared to the OEM header and are size specific depending on application and desired power. Our headers also maintain the stock amount of ground clearance which eliminates the risk of header damage from a low hanging primary tube which is common for most other aftermarket headers.

Benefits:
· Increases horsepower and torque
· Up to 30 HP & 30 lb/ft. TQ - depending on application
· Typical gains are ~15 HP/TQ
· Optimizes exhaust flow for increased power in the higher RPM’s
· Improves turbocharger spool characteristics for increased mid range torque
· Perfect fit - direct replacement for the OEM headers
· Meticulously hand fabricated in our AZ headquarters by EVOMS Master Fabricator: Al Berini
· Manufactured with the finest grade stainless steel
· 50 state emissions legal
· Lifetime warranty against cracking / manufacturing defects – Original purchaser.

Цена: 3700.00$

0

Постоянная ссылка на данный товар:
http://topspeed.ua/products/evoms-650-750hp-kollektory-porsche-997996-2198.html

3700.00$

0

+ 38 095 0000100

>

+ 38 095 0000100

>

Прошу перезвонить

Fabspeed Supersport Выхлоп Porsche 997

Производитель: Fabspeed

Цена: 4750.00$

Fabspeed 63.5mm Maxflo Выхлоп Porsche 996

Производитель: Fabspeed

Цена: 3590.00$

Fabspeed Sport Version 3 Выхлоп Porsche 997

Производитель: Fabspeed

Цена: 4520.00$

Fabspeed Sport Выхлоп Porsche 997 GT2

Производитель: Fabspeed

Цена: 5890.00$

Shark Werks Выхлоп Porsche 997 GT2

Производитель: Shark Werks

Цена: 1990.00$

Shark Werks Выхлоп Porsche 997 Turbo

Производитель: Shark Werks

Цена: 1990.00$

AWE Tuning Выхлоп Porsche 996

Производитель: AWE Tuning

Цена: 4690.00$

Fabspeed Коллекторы Porsche 996

Производитель: Fabspeed

Цена: 1830.00$

EVOMS 500-650hp Коллекторы Porsche 997/996

Производитель: Evolution MotorSports

Цена: 3600.00$

EVOMS 650-750hp Коллекторы Porsche 997/996

Производитель: Evolution MotorSports

Цена: 3700.00$