Bullseye Power для тюнинга Mazda 3MPS/6MPS в Украине

+ 38 095 0000100

>

Вы можете задать вопрос или отправить сообщение через форму обратной связи и мы обязательно свяжемся с вами.

0 товар (a, ов)
на сумму 0$

прошу
перезвонить

Прошу перезвонить

Меня зовут:*

Мой телефон (только цифры):*

КАТАЛОГ
О КОМПАНИИ
ОБОРУДОВАНИЕ
ОПЛАТА И ДОСТАВКА
ГАЛЕРЕЯ
ФОРУМ

каталог товаров

Главная » Mazda 3MPS/6MPS » Bullseye Power

Отменить сортировку

Фото

Название и описание Part Number

Цена

Заказ

Bullseye Power S200 Турбина

Производитель: Bullseye Power

By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor. This gives the S200 pressure ratios and efficiencies that can normally only be had with larger, slower spooling turbos. The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST. Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min. Will Support 350hp to 550hp

Цена: 1299.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/bullseye-power-s200-turbina-1179.html

1299.00$

Bullseye Power S300 Турбина

Производитель: Bullseye Power

By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor. This gives the S300 pressure ratios and efficiencies that can normally only be had with larger, slower spooling turbos. The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST. Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min. Will Support 500hp to 900hp

Цена: 1399.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/bullseye-power-s300-turbina-1180.html

1399.00$

Bullseye Power S400 Турбина

Производитель: Bullseye Power

By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor. This gives the S400 pressure ratios and efficiencies that can normally only be had with larger, slower spooling turbos. The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST. Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min. Will Support 500hp to 1800hp

Цена: 1499.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/bullseye-power-s400-turbina-1181.html

1499.00$

Bullseye Power S500 Турбина

Производитель: Bullseye Power

By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor. This gives the S500 pressure ratios and efficiencies that can normally only be had with larger, slower spooling turbos. The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST. Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min. Will Support 1800hp to 2500hp

Цена: 2599.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/bullseye-power-s500-turbina-1182.html

2599.00$

КАТАЛОГ
РАСПРОДАЖА
КОРЗИНА
ОПЛАТА И ДОСТАВКА
КОНТАКТЫ
ФОРУМ

Мы в Facebook

Мы ВКонтакте

О КОМПАНИИ
НАШИ ПРОЕКТЫ
ОБОРУДОВАНИЕ
ДИЛЕРСТВО
ПРЕССА О НАС
ГАЛЕРЕЯ

Warning: Unknown: open(/opt/plesk/php/5.4/var/sessions/sess_3013d43edad81f18f469302df1dd39c3, O_RDWR) failed: Permission denied (13) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/opt/plesk/php/5.4/var/sessions) in Unknown on line 0