Трансмиссия для тюнинга Dodge в Украине

+ 38 095 0000100

>

Вы можете задать вопрос или отправить сообщение через форму обратной связи и мы обязательно свяжемся с вами.

0 товар (a, ов)
на сумму 0$

прошу
перезвонить

Прошу перезвонить

Меня зовут:*

Мой телефон (только цифры):*

КАТАЛОГ
О КОМПАНИИ
ОБОРУДОВАНИЕ
ОПЛАТА И ДОСТАВКА
ГАЛЕРЕЯ
ФОРУМ

каталог товаров

Главная » Dodge » Трансмиссия

12След. »

Отменить сортировку

Фото

Название и описание Part Number

Цена

Заказ

McLeod Twin Disc Clutch Kit 2015+ Hellcat
6975-07HD

McLeod Twin Disc Clutch Kit 2015+ Hellcat

Part Number: 6975-07HD

Производитель: MSD

Intended for the high horsepower street/strip fan, McLeod RXT 1200 twin disc clutch kits are able to handle 1,200 crank horsepower. With a higher clamp load than standard RXT twin disc clutch kits, RXT 1200 clutch kits can handle almost any horsepower you can throw at them and still remain streetable. Ceramic-lined clutch discs provide smooth engagement with a stock-like pedal feel to make them ideal for the street performance enthusiast. A flat-style flywheel with a crank relief of 6.250 in. diameter or less is required for proper fitment.

Цена: 1600.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/mcleod-twin-disc-clutch-kit-2015-hellcat-4565-6975-07hd.html

1600.00$

Driveshaft Shop алюминиевый карданный вал
CHSH15-A-HELL-D

Driveshaft Shop алюминиевый карданный вал

Part Number: CHSH15-A-HELL-D

Производитель: Driveshaft Shop

Superior 4-Inch 1-Piece Driveshaft
High-Strength Aluminum Construction
Lightweight Build at 25-Pounds
1350 U-Joint and Custom CV
Rated for 1000-Horsepower
12-Month Limited Warranty
Modifications May Be Required
Fits all 2015-2018 Dodge Challengers with Manual Transmissions

Цена: 1000.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/driveshaft-shop-alyuminievyj-kardannyj-val-4577-chsh15-a-hell-d.html

1000.00$

Driveshaft Shop Axles Direct FIT 1400HP SET HELLCAT/SRT8
RA7285X5/RA7285X5

Driveshaft Shop Axles Direct FIT 1400HP SET HELLCAT/SRT8

Part Number: RA7285X5/RA7285X5

Производитель: Driveshaft Shop

Now available from The Driveshaft Shop, the new 1400HP Hellcat/SRT8 axles! If you want the very best and strongest axle available for this platform. this is it second to none. This axle is designed for a real race car that just happens to be street driven. The inner and outer CV we have developed use a modified Porsche style 108mm CV that we have put custom made fully REM polished internals and our torsional 300M chromoly axle bars that have been used in every record breaking IRS car out today. Inner and outer CVs are our new 2-piece billet flanges with a 300M spline section to fit into the differential and wheel hubs. This set of axles has only one problem, they do not come with the ABS / Tone rings on them, but are machined for you to easily transfer over the rings from your stock axles. They are a direct bolt-in and there are no modifications needed for installation.

Цена: 840.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/driveshaft-shop-axles-direct-fit-1400hp-set-hellcatsrt8-4583-ra7285x5ra7285x5.html

840.00$

Driveshaft Shop карбоновый карданный вал Hellcat
CHSH32-C-CV

Driveshaft Shop карбоновый карданный вал Hellcat

Part Number: CHSH32-C-CV

Производитель: Driveshaft Shop

FEATURES:
• Fits Dodge Hellcat Challenger 2015+ w/Automatic Transmission
• 1pc High strength Carbon Fiber
• Dampened Driveshaft H90/230mm
• 1350 u-joint
• Custom 108mm CV w/high speed boot and special grease
• Spline made from 300m and installed into aluminum head for superior strength and lightweight
• Balanced on high speed machine
• Comes complete with all high grade hardware
• Rated for 1000+HP
NOTE: This driveshaft for 2015+ models DO NOT REQUIRE SPACERS.

Цена: 1750.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/driveshaft-shop-karbonovyj-kardannyj-val-hellcat-4584-chsh32-c-cv.html

1750.00$

ATI Super Damper 6.2L Hemi
918485

ATI Super Damper 6.2L Hemi

Part Number: 918485

Производитель: ATI

Engine Balance:Internal
Safety Rating:SFI 18.1
Degree Markings:Yes
Degree Marking Range:360
Outside Diameter (in):8.870 in.
Harmonic Balancer Material:Aluminum
Harmonic Balancer Construction:Elastomer
Harmonic Balancer Finish:Black zinc chromate
Mounting Hardware Included:No

Цена: 600.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/ati-super-damper-62l-hemi-4586-918485.html

600.00$

ATI SFI Flexplates
915663

ATI SFI Flexplates

Part Number: 915663

Производитель: ATI

ATI Flexplates are created from custom drawn SFI-spec chromoloy steel and are SFI 29.1 Certified.

The flexplates are double MIG/TIG welded for additional strength and lasting precision pass after pass. Each ATI flexplate is manufactured and toleranced from OEM drawings to ensure a precise fit and location.

Each plate is quality inspected to EXCEED the flatness and run-out tolerances of the OEM units and is precision balanced on Hines digital equipment with a resolution of 0.10 oz-in.

Цена: 200.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/ati-sfi-flexplates-4588-915663.html

200.00$

Barton Flat stick and T-Handle
BC-0914-9

Barton Flat stick and T-Handle

Part Number: BC-0914-9

Производитель: B&M

Fits 2009-18 Challenger and Hellcat- Includes Barton Flat stick and T-Handle. Note: The Factory Shift knob will Also work with this shifter. Throw reduction 44%

.FULL isolation of the handle from the shifter makes this the quietest shifter we have ever produced. Full replacement means no transferring of rubber dust boots. Comes complete with all boots. The only shifter on the market for your Challenger that has self centering springs. They help mask the slop that is in the gear selector rod. This gives you a perfect 2-3 shift EVERY time. The transmission has internal springs but the problem is that when you change gears from the left gate of gears 1 and 2, and the right gate of gears 5 and 6, back to the center gates of 3 and 4, the shift rod moves back to where it needs to be, but because of the slop in the yoke, the linkage does not center back to where it needs to be, leading to missed shifts. The centering springs in our shifter will help aid the yoke and linkage back in alignment with the selector rod.

Цена: 620.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/barton-flat-stick-and-t-handle-4589-bc-0914-9.html

620.00$

Barton Shifter with Pistol Grip
BC0914-3

Barton Shifter with Pistol Grip

Part Number: BC0914-3

Производитель: B&M

Barton Shifter fits Dodge 2009-18 Challenger and Hellcat. This is a Pistol Grip with a BARTON shifter. You gain side to side, and front to back Adjustment. Multiple powder coat color options for the Pistol Grip. Please allow for 1-2 weeks processing times due to all the powder coat colors and engraving options.
Throw reduction 44%
Quiet: Full isolation of the handle from the shifter makes this the quietest shifter we have ever produced.
Full replacement - No transferring of rubber dust boots. Comes complete with all boots.

Цена: 715.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/barton-shifter-with-pistol-grip-4590-bc0914-3.html

715.00$

McLeod RXT Street Twin Clutch Kits
6975-04M

McLeod RXT Street Twin Clutch Kits

Part Number: 6975-04M

Производитель: MSD

Intended for the high horsepower street/strip fan, the McLeod RXT Street twin clutch kit is able to handle 1000hp, this clutch can handle almost any horse-power you can throw at it and still remain streetable. Organic lined clutch discs will provide smooth engagement with a soft pedal effort to make this clutch kit ideal for the street performance enthusiast. Kit Includes: Pressure Plate, two organic friction discs, steel flywheel, floater plate, adapter ring and pilot tool.

Цена: 1400.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/mcleod-rxt-street-twin-clutch-kits-4600-6975-04m.html

1400.00$

Barton Industries Shifter w/ Flat Stick Challenger
BISFSTICK

Barton Industries Shifter w/ Flat Stick Challenger

Part Number: BISFSTICK

Производитель: B&M

The only shifter on the market for your Challenger that has self centering springs. They help mask the slop that is in the gear selector rod. This gives you a perfect 2-3 shift EVERY time. The transmission has internal springs but the problem is that when you change gears from the left gate of gears 1 and 2, and the right gate of gears 5 and 6, back to the center gates of 3 and 4, the shift rod moves back to where it needs to be, but because of the slop in the yoke, the linkage does not center back to where it needs to be, leading to missed shifts. The centering springs in our shifter will help aid the yoke and linkage back in alignment with the selector rod.

Цена: 630.00$

Постоянная ссылка на данный товар:
http://topspeed.ua/products/barton-industries-shifter-w-flat-stick-challenger-4615-bisfstick.html

630.00$

12След. »

КАТАЛОГ
РАСПРОДАЖА
КОРЗИНА
ОПЛАТА И ДОСТАВКА
КОНТАКТЫ
ФОРУМ

Мы в Facebook

Мы ВКонтакте

О КОМПАНИИ
НАШИ ПРОЕКТЫ
ОБОРУДОВАНИЕ
ДИЛЕРСТВО
ПРЕССА О НАС
ГАЛЕРЕЯ

Warning: Unknown: open(/opt/plesk/php/5.4/var/sessions/sess_1b0d335ef9031a77ee7a4caddf57ed5f, O_RDWR) failed: Permission denied (13) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/opt/plesk/php/5.4/var/sessions) in Unknown on line 0